diff --git a/usermods/Battery/assets/battery_connection_schematic_esp32.png b/usermods/Battery/assets/battery_connection_schematic_esp32.png new file mode 100644 index 00000000..3890f477 Binary files /dev/null and b/usermods/Battery/assets/battery_connection_schematic_esp32.png differ diff --git a/usermods/Battery/assets/battery_connection_schematic_esp32_v2.png b/usermods/Battery/assets/battery_connection_schematic_esp32_v2.png new file mode 100644 index 00000000..2dff54f8 Binary files /dev/null and b/usermods/Battery/assets/battery_connection_schematic_esp32_v2.png differ diff --git a/usermods/Battery/assets/installation_my_config_h.png b/usermods/Battery/assets/installation_my_config_h.png new file mode 100644 index 00000000..06235a22 Binary files /dev/null and b/usermods/Battery/assets/installation_my_config_h.png differ diff --git a/usermods/Battery/assets/installation_platformio_override_ini.png b/usermods/Battery/assets/installation_platformio_override_ini.png new file mode 100644 index 00000000..72cca7dc Binary files /dev/null and b/usermods/Battery/assets/installation_platformio_override_ini.png differ diff --git a/usermods/Battery/readme.md b/usermods/Battery/readme.md index b3607482..b6918c59 100644 --- a/usermods/Battery/readme.md +++ b/usermods/Battery/readme.md @@ -6,53 +6,78 @@ Enables battery level monitoring of your project. -For this to work, the positive side of the (18650) battery must be connected to pin `A0` of the d1 mini/esp8266 with a 100k Ohm resistor (see [Useful Links](#useful-links)). - -If you have an ESP32 board, connect the positive side of the battery to ADC1 (GPIO32 - GPIO39) - -

- +

+

+
+ ## ⚙️ Features -- 💯 Displays current battery voltage +- 💯 Displays current battery voltage - 🚥 Displays battery level -- 🚫 Auto-off with configurable Threshold +- 🚫 Auto-off with configurable threshold - 🚨 Low power indicator with many configuration possibilities +

+ ## 🎈 Installation -define `USERMOD_BATTERY` in `wled00/my_config.h` +| **Option 1** | **Option 2** | +|--------------|--------------| +| In `wled00/my_config.h`
Add the line: `#define USERMOD_BATTERY`

[Example: my_config.h](assets/installation_my_config_h.png) | In `platformio_override.ini` (or `platformio.ini`)
Under: `build_flags =`, add the line: `-D USERMOD_BATTERY`

[Example: platformio_override.ini](assets/installation_platformio_override_ini.png) | -### Example wiring +

-

- -

+## 🔌 Example wiring -### Define Your Options +- (see [Useful Links](#useful-links)). + + + + + + + + +
+ +

ESP8266
+ With a 100k Ohm resistor, connect the positive
+ side of the battery to pin `A0`.

+ 		+ +

ESP32 (+S2, S3, C3 etc...)
+ Use a voltage divider (two resistors of equal value).
+ Connect to ADC1 (GPIO32 - GPIO39). GPIO35 is Default.

+
+ +

+ +## Define Your Options | Name | Unit | Description | | ----------------------------------------------- | ----------- |-------------------------------------------------------------------------------------- | -| `USERMOD_BATTERY` | | define this (in `my_config.h`) to have this usermod included wled00\usermods_list.cpp | -| `USERMOD_BATTERY_MEASUREMENT_PIN` | | defaults to A0 on ESP8266 and GPIO35 on ESP32 | -| `USERMOD_BATTERY_MEASUREMENT_INTERVAL` | ms | battery check interval. defaults to 30 seconds | -| `USERMOD_BATTERY_{TYPE}_MIN_VOLTAGE` | v | minimum battery voltage. default is 2.6 (18650 battery standard) | -| `USERMOD_BATTERY_{TYPE}_MAX_VOLTAGE` | v | maximum battery voltage. default is 4.2 (18650 battery standard) | -| `USERMOD_BATTERY_{TYPE}_TOTAL_CAPACITY` | mAh | the capacity of all cells in parallel summed up | -| `USERMOD_BATTERY_{TYPE}_CALIBRATION` | | offset / calibration number, fine tune the measured voltage by the microcontroller | +| `USERMOD_BATTERY` | | Define this (in `my_config.h`) to have this usermod included wled00\usermods_list.cpp | +| `USERMOD_BATTERY_MEASUREMENT_PIN` | | Defaults to A0 on ESP8266 and GPIO35 on ESP32 | +| `USERMOD_BATTERY_MEASUREMENT_INTERVAL` | ms | Battery check interval. defaults to 30 seconds | +| `USERMOD_BATTERY_{TYPE}_MIN_VOLTAGE` | v | Minimum battery voltage. default is 2.6 (18650 battery standard) | +| `USERMOD_BATTERY_{TYPE}_MAX_VOLTAGE` | v | Maximum battery voltage. default is 4.2 (18650 battery standard) | +| `USERMOD_BATTERY_{TYPE}_TOTAL_CAPACITY` | mAh | The capacity of all cells in parallel summed up | +| `USERMOD_BATTERY_{TYPE}_CALIBRATION` | | Offset / calibration number, fine tune the measured voltage by the microcontroller | | Auto-Off | --- | --- | -| `USERMOD_BATTERY_AUTO_OFF_ENABLED` | true/false | enables auto-off | -| `USERMOD_BATTERY_AUTO_OFF_THRESHOLD` | % (0-100) | when this threshold is reached master power turns off | +| `USERMOD_BATTERY_AUTO_OFF_ENABLED` | true/false | Enables auto-off | +| `USERMOD_BATTERY_AUTO_OFF_THRESHOLD` | % (0-100) | When this threshold is reached master power turns off | | Low-Power-Indicator | --- | --- | -| `USERMOD_BATTERY_LOW_POWER_INDICATOR_ENABLED` | true/false | enables low power indication | -| `USERMOD_BATTERY_LOW_POWER_INDICATOR_PRESET` | preset id | when low power is detected then use this preset to indicate low power | -| `USERMOD_BATTERY_LOW_POWER_INDICATOR_THRESHOLD` | % (0-100) | when this threshold is reached low power gets indicated | -| `USERMOD_BATTERY_LOW_POWER_INDICATOR_DURATION` | seconds | for this long the configured preset is played | +| `USERMOD_BATTERY_LOW_POWER_INDICATOR_ENABLED` | true/false | Enables low power indication | +| `USERMOD_BATTERY_LOW_POWER_INDICATOR_PRESET` | preset id | When low power is detected then use this preset to indicate low power | +| `USERMOD_BATTERY_LOW_POWER_INDICATOR_THRESHOLD` | % (0-100) | When this threshold is reached low power gets indicated | +| `USERMOD_BATTERY_LOW_POWER_INDICATOR_DURATION` | seconds | For this long the configured preset is played | All parameters can be configured at runtime via the Usermods settings page. +
+ **NOTICE:** Each Battery type can be pre-configured individualy (in `my_config.h`) | Name | Alias | `my_config.h` example | @@ -60,62 +85,85 @@ All parameters can be configured at runtime via the Usermods settings page. | Lithium Polymer | lipo (Li-Po) | `USERMOD_BATTERY_lipo_MIN_VOLTAGE` | | Lithium Ionen | lion (Li-Ion) | `USERMOD_BATTERY_lion_TOTAL_CAPACITY` | +

+ +## 🔧 Calibration + +The calibration number is a value that is added to the final computed voltage after it has been scaled by the voltage multiplier. + +It fine-tunes the voltage reading so that it more closely matches the actual battery voltage, compensating for inaccuracies inherent in the voltage divider resistors or the ESP's ADC measurements. + +Set calibration either in the Usermods settings page or at compile time in `my_config.h` or `platformio_override.ini`. + +It can be either a positive or negative number. + +

+ ## ⚠️ Important -- Make sure you know your battery specifications! All batteries are **NOT** the same! -- Example: +Make sure you know your battery specifications! All batteries are **NOT** the same! -| Your battery specification table | | Options you can define | -| :-------------------------------- |:--------------- | :---------------------------- | -| Capacity | 3500mAh 12,5 Wh | | -| Minimum capacity | 3350mAh 11,9 Wh | | +Example: + +| Your battery specification table | | Options you can define | +| --------------------------------- | --------------- | ----------------------------- | +| Capacity | 3500mAh 12.5Wh | | +| Minimum capacity | 3350mAh 11.9Wh | | | Rated voltage | 3.6V - 3.7V | | -| **Charging end voltage** | **4,2V ± 0,05** | `USERMOD_BATTERY_MAX_VOLTAGE` | -| **Discharge voltage** | **2,5V** | `USERMOD_BATTERY_MIN_VOLTAGE` | +| **Charging end voltage** | **4.2V ± 0.05** | `USERMOD_BATTERY_MAX_VOLTAGE` | +| **Discharge voltage** | **2.5V** | `USERMOD_BATTERY_MIN_VOLTAGE` | | Max. discharge current (constant) | 10A (10000mA) | | | max. charging current | 1.7A (1700mA) | | | ... | ... | ... | | .. | .. | .. | -Specification from: [Molicel INR18650-M35A, 3500mAh 10A Lithium-ion battery, 3.6V - 3.7V](https://www.akkuteile.de/lithium-ionen-akkus/18650/molicel/molicel-inr18650-m35a-3500mah-10a-lithium-ionen-akku-3-6v-3-7v_100833) +Specification from: [Molicel INR18650-M35A, 3500mAh 10A Lithium-ion battery, 3.6V - 3.7V](https://www.akkuteile.de/lithium-ionen-akkus/18650/molicel/molicel-inr18650-m35a-3500mah-10a-lithium-ionen-akku-3-6v-3-7v_100833) + +

## 🌐 Useful Links - https://lazyzero.de/elektronik/esp8266/wemos_d1_mini_a0/start - https://arduinodiy.wordpress.com/2016/12/25/monitoring-lipo-battery-voltage-with-wemos-d1-minibattery-shield-and-thingspeak/ +

+ ## 📝 Change Log +2024-05-11 + +- Documentation updated + 2024-04-30 -- integrate factory pattern to make it easier to add other / custom battery types -- update readme +- Integrate factory pattern to make it easier to add other / custom battery types +- Update readme 2023-01-04 -- basic support for LiPo rechargeable batteries ( `-D USERMOD_BATTERY_USE_LIPO`) -- improved support for esp32 (read calibrated voltage) -- corrected config saving (measurement pin, and battery min/max were lost) -- various bugfixes +- Basic support for LiPo rechargeable batteries (`-D USERMOD_BATTERY_USE_LIPO`) +- Improved support for ESP32 (read calibrated voltage) +- Corrected config saving (measurement pin, and battery min/max were lost) +- Various bugfixes 2022-12-25 -- added "auto-off" feature -- added "low-power-indication" feature -- added "calibration/offset" field to configuration page -- added getter and setter, so that user usermods could interact with this one -- update readme (added new options, made it markdownlint compliant) +- Added "auto-off" feature +- Added "low-power-indication" feature +- Added "calibration/offset" field to configuration page +- Added getter and setter, so that user usermods could interact with this one +- Update readme (added new options, made it markdownlint compliant) 2021-09-02 -- added "Battery voltage" to info -- added circuit diagram to readme -- added MQTT support, sending battery voltage -- minor fixes +- Added "Battery voltage" to info +- Added circuit diagram to readme +- Added MQTT support, sending battery voltage +- Minor fixes 2021-08-15 -- changed `USERMOD_BATTERY_MIN_VOLTAGE` to 2.6 volt as default for 18650 batteries +- Changed `USERMOD_BATTERY_MIN_VOLTAGE` to 2.6 volt as default for 18650 batteries - Updated readme, added specification table 2021-08-10