wartana/WLED
1
0
Fork 0
Code Issues Pull Requests Actions 2 Packages Projects Releases Wiki Activity

Merge branch 'filesystem' into 1m_ota

Browse Source
This commit is contained in:
Aircoookie
2020-11-18 01:05:51 +01:00
committed by GitHub
parent 77aa2b6ba9 5119799256
commit 6b942be1cd
39 changed files with 4478 additions and 2665 deletions
Download Patch File Download Diff File Expand all files Collapse all files

62
wled00/const.h
View File

@@ -72,20 +72,46 @@
#define DMX_MODE_MULTIPLE_RGB 4 //every LED is addressed with its own RGB (ledCount * 3 channels)
#define DMX_MODE_MULTIPLE_DRGB 5 //every LED is addressed with its own RGB and share a master dimmer (ledCount * 3 + 1 channels)
//Light capability byte (unused)
//Light capability byte (unused) 0bRRCCTTTT
//bits 0/1/2/3: specifies a type of LED driver. A single "driver" may have different chip models but must have the same protocol/behavior
//bits 4/5: specifies the class of LED driver - 0b00 (dec. 0-15) unconfigured/reserved
// - 0b01 (dec. 16-31) digital (data pin only)
// - 0b10 (dec. 32-47) analog (PWM)
// - 0b11 (dec. 48-63) digital (data + clock / SPI)
//bits 6/7 are reserved and set to 0b00
#define TYPE_NONE 0 //light is not configured
#define TYPE_RESERVED 1 //unused. Might indicate a "virtual" light
#define TYPE_WS2812_RGB 2
#define TYPE_SK6812_RGBW 3
#define TYPE_WS2812_WWA 4 //amber + warm + cold white
#define TYPE_WS2801 5
#define TYPE_ANALOG_1CH 6 //single channel PWM. Uses value of brightest RGBW channel
#define TYPE_ANALOG_2CH 7 //analog WW + CW
#define TYPE_ANALOG_3CH 8 //analog RGB
#define TYPE_ANALOG_4CH 9 //analog RGBW
#define TYPE_ANALOG_5CH 10 //analog RGB + WW + CW
#define TYPE_APA102 11
#define TYPE_LPD8806 12
//Digital types (data pin only) (16-31)
#define TYPE_WS2812_1CH 20 //white-only chips
#define TYPE_WS2812_WWA 21 //amber + warm + cold white
#define TYPE_WS2812_RGB 22
#define TYPE_GS8608 23 //same driver as WS2812, but will require signal 2x per second (else displays test pattern)
#define TYPE_WS2811_400KHZ 24 //half-speed WS2812 protocol, used by very old WS2811 units
#define TYPE_SK6812_RGBW 30
//"Analog" types (PWM) (32-47)
#define TYPE_ONOFF 40 //binary output (relays etc.)
#define TYPE_ANALOG_1CH 41 //single channel PWM. Uses value of brightest RGBW channel
#define TYPE_ANALOG_2CH 42 //analog WW + CW
#define TYPE_ANALOG_3CH 43 //analog RGB
#define TYPE_ANALOG_4CH 44 //analog RGBW
#define TYPE_ANALOG_5CH 45 //analog RGB + WW + CW
//Digital types (data + clock / SPI) (48-63)
#define TYPE_WS2801 50
#define TYPE_APA102 51
#define TYPE_LPD8806 52
#define TYPE_P9813 53
#define TYPE_TM1814 54
//Button type
#define BTN_TYPE_NONE 0
#define BTN_TYPE_RESERVED 1
#define BTN_TYPE_PUSH 2
#define BTN_TYPE_PUSH_ACT_HIGH 3 //not implemented
#define BTN_TYPE_SWITCH 4 //not implemented
#define BTN_TYPE_SWITCH_ACT_HIGH 5 //not implemented
//Hue error codes
#define HUE_ERROR_INACTIVE 0
@@ -105,14 +131,21 @@
#define SEG_OPTION_FREEZE 5 //Segment contents will not be refreshed
#define SEG_OPTION_TRANSITIONAL 7
// WLED Error modes
#define ERR_NONE 0 // All good :)
#define ERR_EEP_COMMIT 2 // Could not commit to EEPROM (wrong flash layout?)
#define ERR_JSON 9 // JSON parsing failed (input too large?)
#define ERR_FS_BEGIN 10 // Could not init filesystem (no partition?)
#define ERR_FS_QUOTA 11 // The FS is full or the maximum file size is reached
#define ERR_FS_PLOAD 12 // It was attempted to load a preset that does not exist
#define ERR_FS_GENERAL 19 // A general unspecified filesystem error occured
//Timer mode types
#define NL_MODE_SET 0 //After nightlight time elapsed, set to target brightness
#define NL_MODE_FADE 1 //Fade to target brightness gradually
#define NL_MODE_COLORFADE 2 //Fade to target brightness and secondary color gradually
#define NL_MODE_SUN 3 //Sunrise/sunset. Target brightness is set immediately, then Sunrise effect is started. Max 60 min.
//EEPROM size
#define EEPSIZE 2560 //Maximum is 4096
#define NTP_PACKET_SIZE 48
@@ -130,6 +163,7 @@
#define ABL_MILLIAMPS_DEFAULT 850; // auto lower brightness to stay close to milliampere limit
#define TOUCH_THRESHOLD 32 // limit to recognize a touch, higher value means more sensitive
// Size of buffer for API JSON object (increase for more segments)