Remove platformio_override.ini leaving only sample envs

platformio_override.ini

@@ -1,88 +0,0 @@
-# Example PlatformIO Project Configuration Override
-# ------------------------------------------------------------------------------
-# Copy to platformio_override.ini to activate overrides
-# ------------------------------------------------------------------------------
-# Please visit documentation: https://docs.platformio.org/page/projectconf.html
-
-[platformio]
-default_envs = esp32dev_hub75, adafruit_matrixportal_esp32s3, esp32S3_PSRAM_HUB75, esp32dev_hub75_forum_pinout
-
-[env:esp32dev_hub75]
-board = esp32dev
-upload_speed = 921600
-platform = ${esp32_idf_V4.platform}
-platform_packages =
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags}
-  -D WLED_RELEASE_NAME=\"ESP32_hub75\"
-  -D WLED_ENABLE_HUB75MATRIX -D NO_GFX -D NO_CIE1931
-  ; -D ESP32_FORUM_PINOUT ;; enable for SmartMatrix default pins
-  ; -D WLED_DEBUG
-lib_deps = ${esp32_idf_V4.lib_deps}
-  https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-DMA.git#3.0.11
-
-monitor_filters = esp32_exception_decoder
-board_build.partitions = ${esp32.default_partitions}
-board_build.flash_mode = dio
-
-[env:esp32dev_hub75_forum_pinout]
-extends = env:esp32dev_hub75
-build_flags = ${common.build_flags}
-              -D WLED_RELEASE_NAME=\"ESP32_hub75_forum_pinout\"
-              -D WLED_ENABLE_HUB75MATRIX -D NO_GFX -D NO_CIE1931
-              -D ESP32_FORUM_PINOUT ;; enable for SmartMatrix default pins
-; -D WLED_DEBUG
-
-
-[env:adafruit_matrixportal_esp32s3]
-; ESP32-S3 processor, 8 MB flash, 2 MB of PSRAM, dedicated driver pins for HUB75
-board = lolin_s3_mini
-platform = ${esp32s3.platform}
-platform_packages =
-upload_speed = 921600
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_4M_qspi\"
-  -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
-  -DBOARD_HAS_PSRAM
-  -DLOLIN_WIFI_FIX ; seems to work much better with this
-  -D WLED_WATCHDOG_TIMEOUT=0
-  ${esp32.AR_build_flags}
-  -D WLED_ENABLE_HUB75MATRIX -D NO_GFX -D NO_CIE1931
-  -D S3_LCD_DIV_NUM=20 ;; Attempt to fix wifi performance issue when panel active with S3 chips
-  -D ARDUINO_ADAFRUIT_MATRIXPORTAL_ESP32S3
-
-lib_deps = ${esp32s3.lib_deps}
-  ${esp32.AR_lib_deps}
-  https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-DMA.git#aa28e2a ;; S3_LCD_DIV_NUM fix
-
-board_build.partitions = ${esp32.default_partitions}
-board_build.f_flash = 80000000L
-board_build.flash_mode = qio
-monitor_filters = esp32_exception_decoder
-
-[env:esp32S3_PSRAM_HUB75]
-;; MOONHUB HUB75 adapter board
-board = lilygo-t7-s3
-platform = ${esp32s3.platform}
-platform_packages =
-upload_speed = 921600
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"esp32S3_16MB_PSRAM_HUB75\"
-              -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
-              -DBOARD_HAS_PSRAM
-              -DLOLIN_WIFI_FIX ; seems to work much better with this
-              -D WLED_WATCHDOG_TIMEOUT=0
-              ${esp32.AR_build_flags}
-              -D WLED_ENABLE_HUB75MATRIX -D NO_GFX -D NO_CIE1931
-              -D S3_LCD_DIV_NUM=20 ;; Attempt to fix wifi performance issue when panel active with S3 chips
-              -D MOONHUB_S3_PINOUT ;; HUB75 pinout
-
-lib_deps = ${esp32s3.lib_deps}
-           ${esp32.AR_lib_deps}
-           https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-DMA.git#aa28e2a ;; S3_LCD_DIV_NUM fix
-
-board_build.partitions = ${esp32.default_partitions}
-board_build.f_flash = 80000000L
-board_build.flash_mode = qio
-monitor_filters = esp32_exception_decoder
-

platformio_override.sample.ini

@@ -589,7 +589,7 @@ platform = ${esp32_idf_V4.platform}
 platform_packages =
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags}
-  -D WLED_RELEASE_NAME=ESP32_hub75
+  -D WLED_RELEASE_NAME=\"ESP32_hub75\"
   -D WLED_ENABLE_HUB75MATRIX -D NO_GFX -D NO_CIE1931
   ; -D ESP32_FORUM_PINOUT ;; enable for SmartMatrix default pins
   ; -D WLED_DEBUG
@@ -600,6 +600,14 @@ monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32.default_partitions}
 board_build.flash_mode = dio
 
+[env:esp32dev_hub75_forum_pinout]
+extends = env:esp32dev_hub75
+build_flags = ${common.build_flags}
+              -D WLED_RELEASE_NAME=\"ESP32_hub75_forum_pinout\"
+              -D WLED_ENABLE_HUB75MATRIX -D NO_GFX -D NO_CIE1931
+              -D ESP32_FORUM_PINOUT ;; enable for SmartMatrix default pins
+; -D WLED_DEBUG
+
 
 [env:adafruit_matrixportal_esp32s3]
 ; ESP32-S3 processor, 8 MB flash, 2 MB of PSRAM, dedicated driver pins for HUB75
@@ -608,7 +616,7 @@ platform = ${esp32s3.platform}
 platform_packages =
 upload_speed = 921600
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_4M_qspi
+build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_4M_qspi\"
   -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   -DBOARD_HAS_PSRAM
   -DLOLIN_WIFI_FIX ; seems to work much better with this
@@ -652,11 +660,3 @@ board_build.partitions = ${esp32.default_partitions}
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
 monitor_filters = esp32_exception_decoder
-
-[env:esp32dev_hub75_forum_pinout]
-extends = env:esp32dev_hub75
-build_flags = ${common.build_flags}
-              -D WLED_RELEASE_NAME=\"ESP32_hub75_forum_pinout\"
-              -D WLED_ENABLE_HUB75MATRIX -D NO_GFX -D NO_CIE1931
-              -D ESP32_FORUM_PINOUT ;; enable for SmartMatrix default pins
-; -D WLED_DEBUG